Error compiling for board arduino/genuino uno
Error compiling for board arduino/genuino uno del momento
exit code 1 arduino
I have compiled other previous programs (as a test, if it happens in other programs) and it compiles normally, but in this programming, I make use of conditionals, such as if, while, else. and I get the error.
Hello friends, thank you for taking your time to help and respond to my failure. Indeed it is when I use the conditionals, I have done two simple programs and both give me error when compiling, compile other programs that I have without the conditionals and compile normal.
By the way, according to the second code fragment… as far as I see you have tried to make a function in which, if you press once, the led turns on, and if you press again, it turns off, and so on to infinity.
Well, be careful with this, when you read the state with «STATE = digitalRead(LED);» depending on the type of micro can work or not … it is good practice to declare another variable to store a memory of the previous state in which the LED was and use it instead of reading the state in this way.
collect2.exe: error: ld returned 1 exit status exit status 1 error compiling for board arduino uno
I have compiled other previous programs (as a test, if it happens in other programs) and it compiles normally, but in this programming, I make use of conditionals, such as if, while, else. and I get the error.
Hello friends, thank you for taking your time to help and respond to my failure. Indeed it is when I use the conditionals, I have done two simple programs and both give me error when compiling, compile other programs that I have without the conditionals and compile normal.
By the way, according to the second code fragment… as far as I see you have tried to make a function in which, if you press once, the led turns on, and if you press again, it turns off, and so on to infinity.
Well, be careful with this, when you read the state with «STATE = digitalRead(LED);» depending on the type of micro can work or not … it is good practice to declare another variable to store a memory of the previous state in which the LED was and use it instead of reading the state in this way.
exit status 1 error compiling for board arduino/genuino uno solution
Most Arduino boards consist of an Atmel-8-bit AVR microcontroller (ATmega8, ATmega168, ATmega328, ATmega1280, ATmega2560), each microcontroller consists of varying amounts of flash memory, pins and functions. The boards use single- or double-row female pins/headers that facilitate connections and incorporation into other circuits.[26] The board has 14 digital pins.
The board has 14 digital pins, 6 analog pins programmable with the Arduino IDE (Integrated Development Environment) via USB cable. It can be powered by the USB cable or by an external 9-volt battery, although it accepts voltages between 7 and 20 volts. It is the flagship of Arduino as it is the most popular board, the one everyone uses to get started and the simplest to use. It is the starting point for many electronics programming enthusiasts.
The board with the most powerful microcontroller in the Arduino family. With 54 digital pins that function as input and output; 16 analog inputs, a 16 MHz oscillator crystal, a USB connection, a reset button and an input for board power. Arduino MEGA is the board that is used when Arduino UNO falls short of a project’s needs. It has been widely used as a control and computation center in 3D printers….
